The Divator MK II is one of the safest and most flexible SCUBAs available. The safety features include dual warning devices, in addition to the pressure gauge the MK II features a sophisticated flow restriction warning to warn the diver when the cylinder pressure is down to 65 bar.
Divator MK II has been tested by the US Navy Experimental Diving Unit (NEDU) and is approved for US Navy use. In the first test report NEDU made the comment "superior performance for cold water use". Key features of the Divator MK II/AGA
The work of breathing is very low, and the breathing curves remains constant all the way down to a empty cylinder. Divator MK II is available with demand valve or positive pressure versions for diving in contaminated waters where the diver do not want leakage.
Divator MK II is designed for integration with Divator DP1 surface supply system.
The combination of Divator MK II and Divator DP1 brings you a complete CE-approved surface supply and bail-out diving system.
The safety features of the Divator MK II have a design based on some of the most extensive failure mode analysis done in the industry. The breathing circuit is designed to deliver air even if the most unusual accidents or malfunctions occur.
The Divator Mask is known around the World as the "AGA Mask", the reason behind this is that the first generation of this full-face mask was developed when Interspiro was still a part of the AGA Corporation. Today the latest generation of the Divator Mask is the Worlds most sold full-face mask, and we dare say one of the finest and most versatile full-face masks ever manufactured. Key features of the Divator Mask
A low volume visor reduces the positive buoyancy generated from air inside the mask. Low volume dead space reduces reinhalation of COČ. Soft and flexible sealing prevent leakage.
The balanced Divator Mask breathing valve is one of the best-tested breathing valves available. The breathing valve will perform even under the most extreme conditions: mud, oil, and fast flowing cold currents does not have a serious impact on the performance.
The mask is equipped with retainers for goggle frames and it is prepared for underwater communication. The communication capabilities are enhanced by the airflow design that considerably reduces turbulence noise.
The standard Divator Mask is equipped with easily adjusted push pads for pressure equalizing of ears and spoilers to prevent mist to be formed on the visor. The Divator Mask is very easy to drain from water filling, simply press one button and hold the lower part of the face mask out from the face.
The Divator Mask is available in three different colours:
Bright yellow ('Gold') Classic Grey Blue Black
The black and yellow mask is made of silicone; the grey mask is made of natural rubber. The choice of material is dependant of their respective chemical and elastic properties.
Breathing valves are available in black and grey, with or without positive pressure. For normal (non-positive) pressure breathing valves mouthpieces are available.
